An Electric DC Motor Control System with Geckodrive320x Driver Module

Agus Hananto, Rachmad Hartono, Ahid Nuristinah

Sari

This research shows an example to make a servo motor which consists of three main components, a DC motor, a control circuit, and a closed feedback system. A rotary encoder is used as a closed feedback system by using Geckodrive320X as a control circuit for controlling DC electric motors as the main components. The results showed that Geckodrive320X can be used to control a DC electric motor as a servo motor. The number of turns of the DC motor shaft depends on the condition of switches SW2 and SW3, achieved by giving four pulses to the Geckodrive320X. The maximum speed able to be controlled by Geckodrive320X is 540 rpm, and the deviation maximum of the slider positioning is 0.01 mm under the conditions of multipliers of 5 and 10.

Kata Kunci

Geckodrive320X; rotary encoder; multiplier; pulses

Teks Lengkap:

PDF (English)

Referensi

Dharmawan, Hari Arief. 2017. Mikrokontroller: Konsep Dasar dan Praktis: Universitas Brawijaya Press.

Faruq, Mohamed Farid Bin Mohamed. 2008. "PID controller design for controlling DC motor speed using matlab application." Universiti Malaysia Pahang, Electrical & Electronics Engineering.

Kurnia, Adam, Oetomo Oetomo, and Herry Sitepu. 2016. "Perancangan Antarmuka Instrumentasi dan Pengendalian Motor Servo Berbasis Octave." Jurnal Telematika no. 10 (1):5.

Lopatinsky, Edward, Daniel Schaefer, Savely Rosenfeld, and Lev Fedoseyev. 2006. Brushless DC electric motor. Google Patents.

Murphy, John, Francis McMullin, Michael Egan, and Michael Brosnan. 1987. Servomotor control systems. Google Patents.

Raditya, Bregas, Enrico Kartanadi, and Jimmy Linggarjati. 2011. "Pengendali Motor Servo DC Menggunakan PI untuk diimplementasikan pada Mesin CNC." Universitas Bina Nusantara.

Widiyanto, Wahyu, Wirawan Sumbodo, and Dony Hidayat Al Janan. 2012. "Analisis Perancangan dan Pembuatan Program PLC Pembacaan Encoder Pada Sistem Robot Record and Replay." Journal of Mechanical Engineering Learning no. 1 (1).

Zhou, Hongfu. 2008. DC servo motor PID control in mobile robots with embedded DSP. Paper read at 2008 International Conference on Intelligent Computation Technology and Automation (ICICTA).

DOI: http://dx.doi.org/10.32423/jmi.2020.v42.72-76

Refbacks

  • Saat ini tidak ada refbacks.